czech English
Košík je prázdný.
BT-210 Set

BT-210 Set

78,70$
Bez daně: 65,00$
Množství:  Dát do košíku  
Výrobce: ROBOTIS
Model:
Bonusové body: 0
Dostupnost: 2
Features

The BT-210 is a product that uses Bluetooth communication to enable serial communication (UART).

The BT-210 covers the circuit with a case to protect it, and it uses a connector-type cable to install on a robot and RC-100B. 

You can control your robot without any problems even when the infrared control condition is not optimal such as in a robot competition.

 

The SLAVE module can be used when controlling the robot from a device that supports Bluetooth communication such as a smartphone, tablet PC or notebook.

Package Components
BT-210 (120mm cable included) 2
H/W Specifications
Weight 4.51g
Size 18mm x 30mm x 9.1mm
Bluetooth  Bluetooth Specification 2.1 Support
Effective Communication Distance 10m
Frequency  2.4 GHz ISM Band
Bandwidth MAX 250kbps
Default Baud rate 57600bps
Sensitivity -81dBm (Typical)
Transmit Power 4dBm(Typical)
Bluetooth Profile Support SPP (Serial Port Profile)
Operational Voltage 3.3V
Consumed Current 48mA (Max)
Operating Temperature -40℃ ~ 85℃
Baud rate Range 1,200bps ~ 400,000bps
Antenna Chip Antenna
Interface UART (3.3V Level)
Conducted Net Power -6 ~ 4dBm (Class 2)
Compatible Products

Controller : CM-530 (Wireless control, wireless download possible)

             CM-510, CM-700 (Wireless control possible (firmware update required))

 

Remote Control : RC-100B

Caution

The MASTER module and the SLAVE module are divided – MASTER module for the transmitter; SLAVE module for the robot.

When first released and purchased, the two modules are paired so there is no need for a separate ID setting procedure. If either of the components is lost, you will have to purchase the BT-210 (Product code 902-0076-000) for pairing.

Directions for pairing can be found in our e-Manual.

 

Click to refer to directions for pairing

 

The initial Pin Code when released from factory is 0000. Use this when connecting to the Bluetooth device(SLAVE). When a change is needed, please refer to the link above. However, OpenCM-9.04-A or C type controller is required. 

 

 

Installation Not Supported

 

-Remote Control : RC-100, RC-100A

-Controller : CM-100, CM-5, CM-2+

Napsat hodnocení

Vaše jméno a příjmení:


Text hodnocení: Poznámka: HTML tagy nebudou převedeny!

Hodnocení: Nejhorší            Nejlepší

Opište prosím kód z obrázku do pole níže:



Facebook komentáře