czech English
Košík je prázdný.


Bez daně: 299,90$
Množství:  Dát do košíku  
Výrobce: ROBOTIS
Bonusové body: 0
Dostupnost: Závazná předobjednávka

■ Basic Features
The DYNAMIXEL X-Series is a new line-up of high performance networked actuators.
For more detailed information, please visit the DYNAMIXEL X-Series Product Information page.

• Improved Torque, Compact Design
• Enhanced Durability and Expandability
• Hollow Back Case Minimizes Cable Stress (3-Way Wiring)
• Frames Directly Screwed onto the Case (No Nuts Needed)
• Improved Aluminum Case Heat Sink 
• 6 Operating Modes
• Current-Based Torque Control (4096 steps, 2.69mA/step)
• Profile Control for Smooth Motion Planning
• Trajectory Data and Moving Status (In-Position, Following Error, etc.)
• Energy Efficient (Standby Current Reduced from 100mA to 40mA)

■ Various Cabling Methods


■ Model Numbering
EN-Model Numbering_NEW.jpg

■ Package Contents

Description Quantity
HORN HN12-N101 1
WASHER Teflon Washer (for Horn Assembly) 1
CABLE Robot Cable-X4P 180mm 1
Robot Cable-X4P
(Convertible) 180mm
BOLT/NUT Wrench Bolt (WB M2.5*4) 16
Wrench Bolt (WB M2.5*6) 1
Wrench Bolt (WB M2*3) 10
ETC Spacer Ring 8



■ H/W Specifications


Model Number XH430-W210-T
Weight (g) 82g
Dimensions (mm) 28.5mm x 46.5mm x 34mm
Gear Ratio 212.6 : 1
Operation Voltage (V) 11.1 12 14.8
Stall Torque (N.m) 2.2 2.5 3.1
Stall Current (A) 1.2 1.3 1.5
No Load Speed (RPM) 46 50 62
Position Sensor Contactless absolute encoder (12BIT,360°) by AMS
Motor Maxon Motor
Resolution 0.088° x 4,096 steps
Operating Range Position Control Mode : 360°
Velocity Control Mode : Endless turn
Input Voltage (V) 10~14.8V (Recommended voltage : 12V)
Operating Temperature (°C) -5°C ~ 80°C
Command Signal Digital Packet
Protocol Type Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity)
Link (physical) TTL Level Multi Drop Bus
ID 253 ID (0~252)
Baud Rate 9600 bps ~ 4.5 Mbps
Feedback Position, Velocity, Current, Realtime tick, Trajectory, Temperature, Input Voltage, etc.
Standby current (mA) Case : Metal (Front, Middle)
Engineering Plastic (Back)
Gear : Full Metal
Standby current 40 mA


■ Default Settings


ID : 1

Baud Rate : 57600bps

*Please make necessary modifications to ID, baud rate, etc. after purchase.

**PC Interface : USB2Dynamixel (Molex-JST Convertible Cable is required)



■ Hyperlinks

Frame, Horn, Bearing Compatible Compatible Chart : Click Here

Controller Compatibility Chart : Click Here

Download Drawing : Click Here

Dynamixel SDK : Click Here

OpenCM IDE : Click Here

Software RoboPlus (R+) : Click Here

Link to e-Manual : Click Here



■ Caution


The DYNAMIXEL X-Series adopted a new gold-plated 

JST connector for secure and reliable communication.

For more information, please see the [DYNAMIXEL Connector Standard] page on the e-Manual.

To control DYNAMIXEL X-Series actuators via OpenCM or USB2Dynamixel,

please use the JST-Molex Convertible Cable enclosed in the package.

 EN-Option Cable_X3P_2017.jpg


Napsat hodnocení

Vaše jméno a příjmení:

Text hodnocení: Poznámka: HTML tagy nebudou převedeny!

Hodnocení: Nejhorší            Nejlepší

Opište prosím kód z obrázku do pole níže:

Facebook komentáře