1. Precisely designed and specially processed Aluminum front case

 

2. Decreased noise and improved protection against heat

 

3. Front screw threads are already threaded for easy bolt assembly

 

4. Maintains same dimensions as the existing DYNAMIXEL M-series (option frames are compatible)

 

 

■ Description

 

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module.

 

MX-series is a new concept of DYNAMIXEL with advanced functions, such as precise control, PID control, 360 degree of position control, and high speed communication.

 

Advanced durability, degree of precision, and wider control zone were achieved thanks to the newly applied CONTACTLESS ABSOLUTE ENCODER

 

360 degrees POSITION CONTROL without dead zone

 

4,096 PRECISE RESOLUTION by 0.088 degrees

 

SPEED CONTROL at ENDLESS TURN MODE

 

Reliability and accuracy were advanced in the position control through PID CONTROL

 

High baud rate up to 4.5Mbps

 

RS-485 LEVEL COMMUNICAITON

 

 

 

 

 

     

 

 

■ Package Contents

 

Description		Quantity
DYNAMIXEL	MX-28AR	1
HORN	RX28 HN07-N101	1
WASHER	Thrust Washer	1
CABLE	4P Cable 200MM	1
BOLT/NUT	Wrench Bolt M2.5*6	16
	Wrench Bolt M2.5*8	1
	Wrench Bolt M2*3	10
	Nut M2.5	18

 

 

■ H/W Specifications

 

Product Name	MX-28AR
Weight	77g
Dimension	35.6mm x 50.6mm x 35.5mm
Gear Ratio	193 : 1
Operation Voltage (V)	11.1	12	14.8
Stall Torque (N.m)	2.3	2.5	3.1
Stall Current (A)	1.3	1.4	1.7
No Load Speed (RPM)	50	55	67
Motor	Maxon Motor
Minimum Control Angle	About 0.088 degrees x 4,096
Operating Range	Actuator Mode : 360 degrees Wheel Mode : Endless turn
Operating Voltage	10~14.8V (Recommended voltage : 12V)
Operating Temperature	-5°C ~ 80°C
Command Signal	Digital Packet
Protocol	Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity)
Link (physical)	RS485 Multi Drop BUS (daisy chain type connector)
ID	254 ID (0~253)
Baud Rate	8000bps ~ 4.5Mbps
Feedback Functions	Position, Temperature, Load, Input Voltage, etc.
Material	Case : Engineering Plastic Gear : Full Metal
Positioin Sensor	Contactless absolute encoder

 

 

  

■ Compatible Products

 

Controller : CM-2+, CM-700, OpenCM9.04 (+ 485 Expansion Board)

Interface : USB2Dynamixel (RS-485)

Old horn : RX-28 HN07-N1 Set, RX-28 HN07-T1 Set, RX-28 HN07-I1 Set

Old frame : RX-28 FR07-H1 Set, RX-28 FR07-S1 Set, RX-28 FR07-B1 Set

New horn :  RX-24F/RX-28 HN07-N101 Set, RX-24F/RX-28 HN07-T101 Set, RX-24F/RX-28 HN07-I101 Set

New frame : RX-24F/RX-28 FR07-H101 Set, RX-24F/RX-28 FR07-S101 Set, RX-24F/RX-28 FR07-B101K Set, RX-24F/RX-28 FR07-F101K Set, RX-24F/RX-28 FR07-X101K Set

 

 

■ Frame Purchase Guide

 

 

Frame/Horn Compatibility Table

 

 

■ Control Environment

  

Robot exclusive software RoboPlus : Download

 

C/C++, C#, Labview, MATLAB, Visual Basic, etc. : Library Download

 

 

■ Drawings

Napsat hodnocení

Vaše jméno a příjmení:


Text hodnocení: Poznámka: HTML tagy nebudou převedeny!

Hodnocení: Nejhorší            Nejlepší

Opište prosím kód z obrázku do pole níže: